Proizvodnja

Technical & production abilities Note
Production area // Total area: Shop floor: 10.095 m2
Open space: 31.991 m2
Greenfield area availbale for expansion: 30.000 m2
Engineering software: 2D and 3D
Autodesk AutoCAD 2016 MD
ZWCAD 2014
Siemens SOLID EDGE 3D
TWI-Welding Coordinator / TWI-Weldspec / TWI-Welderqual
ESPRIT
Maximum crane capacity on site: 28t@asembly and welding workshop
50t@final asembly / painting / loading
Raw material blasting: Automatic steel shotblasting line - maximum material width: 2.500 mm
Steel cutting technology: HiFocus Plasma – max. width 2.500 mm // max. thickness 50 mm
Oxy fuel – max. width 2.500 mm // max. thickness 200 mm
Hydraulic shears: max. width 6.000 mm // max. thickness 10 mm
Maximum bending capacity: 10 mm @ 6.000 mm width // 15 mm @ 4.000,0 mm width // (490,0 kN @ 6.000,0 mm)
Rolling machines: 3x, max. 8 mm @ 2000 m
(30 mm @ 4000 m – outsourced Min. φ 250 mm @1,5 mm)
Welding technologies available: MIG / MAG / TIG / WIG / CMT
Machining: Turning max φ648 lmax=1118mm
Milling 1626×1016×762mm
Standard leakage test: Using penetrating liquid
Other test methods available: Visual control, US, Magnetic particle, Air/Water pressure test, X-Ray
Shotblasting (steel shot, SA 2 1⁄2, SA3): Shotblasting cabins 8x12x6 m // 6x10x5 m
Sandblasting (Silicate, SA 2 1⁄2): Shotblasting cabin 2x3x3 m
Hot Dip Galvanizing (outsourced): Yes, acc. to EN ISO 1461 // EN ISO 14713
Spraygalvanizing: Yes / insourced
Paint application: Spraying (HP airless, air-mix, air), flow coating, brush/roll manual application
Spray application booths: 2 painting & drying cabins, 12.000x8.000x6.000 mm and 10.000x6.000x5.000 mm
Paint material: Liquid paint material i.e. High-Solid paints, Zincflake/Zincdust based;
Water based 1K and 2K; Solvent based 2K EP & PUR)
TOP